=ThatCalc
Calculators / Home & Yard

Paver Calculator

Count the pavers for a patio or walkway, plus the gravel base and leveling sand underneath.

Pavers needed
—
Patio area—
Gravel base—
Gravel weight (approx.)—
Leveling sand—

How it's calculated

paver area (sq ft) = paver length × paver width ÷ 144 pavers = patio area ÷ paver area × (1 + extra %), rounded up base (cu yd) = patio area × base depth (in) ÷ 12 ÷ 27 gravel weight ≈ cubic yards × 1.4 tons (varies by stone)

Example

A 12 ft × 12 ft patio is 144 sq ft. With 4×8 inch pavers and 10% extra, that is 713 pavers. A 4 inch gravel base is about 1.78 cubic yards, and a 1 inch sand bed is about 0.44 cubic yards.

Tips

About 5% extra is enough for a plain rectangle with straight lines. Herringbone patterns, curves and lots of cuts can use 10–15%. Base depth depends on use and soil: walkways and patios often use 4–6 inches, and driveways need more. Your supplier can tell you what works locally.

Common questions

How many 4x8 pavers per square foot?

A 4×8 inch paver covers 32 square inches, so it takes 4.5 pavers per square foot before extra for cuts.

How deep should the gravel base be?

4–6 inches is common for patios and walkways. Soft or wet soil and driveways need a deeper base.

How much sand goes under pavers?

Usually a 1 inch bed of coarse sand, screeded flat over the compacted gravel.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators